54
PICTURE CONTROL
PICTURE CONTROL
Colour Gamut
(Wide/Standard)
• Standard : Mode to reproduce original colour according to the standard of
input signal independent of the display characteristics.
• Wide: Mode to use and set the rich colour area of the display.
Edge Enhancer
(Off/Low/High)
■ Shows clearer and distinctive yet natural corners of the video.
OPC
(On/Off)
* This feature is not available for all models.
■ As the technology to reduce the power consumption while keeping the same
brightness, this has the effect of reducing power consumption, improvement in
contrast.
Colour Standard
(SD/HD)
■ Converts the colour of a different video to HD colour. This function is set
for SD video (BT-601) and HD video (BT-709) colour format.
■ This feature is enabled in “Picture Mode - Expert1/2”.
Colour Filter
(Off/Red/Green/Blue)
■ This is the function to filter the specific colours of the video.
You can use the RGB filter to set colour saturation and hue accurately.
■ This feature is enabled in “Picture Mode - Expert1/2”.
White Balance
(Medium/Warm/Cool)
■ This is the function to adjust the overall colour of the screen to the feeling
you want.
• Red/Green/Blue Contrast, Red/Green/Blue Brightness: The adjustment
range is -50 to +50.
■ This feature is enabled in “Picture Mode - Expert1/2”..
Colour Management
System
■ As the tool used by the experts to make adjustments by using the test patterns,
this does not affect other colours but can be used to selectively adjust the 6
colour areas (Red/Green/Blue/Cyan/Magenta/Yellow).
Colour difference may not be distinctive even when you make the adjustments
for the general video.
■ Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.
• Red/Green/Blue/Yellow/Cyan, Magenta Colour : The adjustment range is -30 to +30.
• Red/Green/Blue/Yellow/Cyan/Magenta Tint : The adjustment range is -30 to +30.
■ This feature is disable in RGB-PC mode.
■ This feature is enabled in “Picture Mode - Expert1/2”.
To Next Page
Loading...
