20
ENG
ENGLISH
MAKING CONNECTIONS
Connecting to an antenna or cable
Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may
differ from the actual items and a RF cable is optional.
CAUTION
y
Make sure not to bend the copper wire of
the RF cable.
Copper wire
y
Complete all connections between devices,
and then connect the power cord to the
power outlet to prevent damage to your TV.
MAKING CONNECTIONS
Connect various external devices to the TV and switch input modes to select an external device. For more
information of external device’s connection, refer to the manual provided with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC,
gaming devices, and other external devices.
NOTE
y
If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable
to the TV through a DVD recorder or VCR. For more information of recording, refer to the manual
provided with the connected device.
y
The external device connection may differ from the model.
y
Connect external devices to the TV regardless of the order of the TV port.
NOTE
y
To improve the picture quality in a poor signal
area, please purchase a signal amplifier and
install properly.
y
Use a signal splitter to use more than 2 TVs.
y
If the antenna is not installed properly,
contact your dealer for assistance.
ANTENNA
IN
To Next Page
Loading...
