LG 32LY760H - EXTERNAL CONTROL DEVICE SETUP; RS-232 C Setup

25
206-4259
(Continued from previous page)
Note: If a TV Software (CPU) le is selected, TV SW Version and Update Version elds will be
displayed at the bottom right of the screen. Ensure the software version of the selected le is the
correct version before applying the update to this TV.
9. If a TLX le that includes an FTG Channel Map is selected, a Channel Tuning / Channel Banner
Display eld will be displayed at the right of the screen. If the FTG Channel Map comprises RF
channels and Aux inputs only (the latter designated by 130-0 through 137-0), you can choose
the format for the channel tuning/banner display. Use the arrow keys on the Installer Remote to
select Logical tuning or Physical tuning. A checkmark will appear at the left of the selected
option. Logical tuning is selected by default.
Note: If an FTG Channel Map includes IP channels, only logical tuning is available. Also, if the
selected TLX le does not include an FTG Channel Map, the message, “No Channel Map in
TLX le,” will be displayed at the right of the screen.
10. When you are ready to continue, use the arrow keys on the Installer Remote to select UPDATE,
and then press OK.
Update progress will be shown in a new screen. Do NOT remove the USB device while
updates are in progress. When the Ez Download process is complete, an overview of the
results will briey be displayed and then, the TV will reboot. *
11. Remove the USB memory device, and verify that the appropriate configuration/update(s) is/are
resident on the TV.
Note: If you updated the TV configuration with a TLX file, upon restart, the TV tunes according
to the Start Channel setting in the Installer Menu. If a Start Channel is specied, the TV will tune
to that channel, though in the case of FTG Mode conguration, a channel banner will only be
displayed if the Start Channel is included in the FTG Channel Map (depending on your selection
in step 9, the channel banner will display either the Start Channel’s logical channel number or
physical RF channel number). Otherwise, the TV will either return to the last channel tuned (TV
in Pass-through Mode) or tune to the rst channel in the FTG Channel Map (TV in FTG Mode).
In the latter case, remember that the channels in the FTG Channel Map are always arranged in
logical order, regardless of your selection in step 9.
Ez Download Utility (Cont.)
* LY760H TVs with CPU software earlier than v3.02.32 will only reboot upon completion of Ez Download
updates if software has just been updated.