LG 32LY760H - Page 57

57
206-4259
IP Environment Setup (Cont.)
MEDIA SHARE
Smart Share
Screen Share
DMR
Bluetooth Sound Sync
TV Name
406KCEA6Q508
SoftAP
Use Default
Security Key
00000000
Pro:Centric
Network
Pre-loaded Apps
^
Media Share Setup
The Media Share Menu allows you to enable the following Media Share
features on this TV:
• LG Smart Share
®
: Allows guests to use the TV to access and view
data shared either by wired DLNA Certied
®
devices connected to
the same LAN as the TV or by wireless LG devices using LG’s Smart
Share application with Wi-Fi Direct
®
.
• Screen Share: Enables screen sharing with a Miracast
®
or Wireless
Display (WiDi) capable device (e.g., a laptop with Intel
®
hardware).
• DMR: Enables the TV to act as a Digital Media Renderer (DMR)
device to receive content from DLNA Certied devices on the same
network.
• Bluetooth Sound Sync: Allows guests to listen to audio from a
Bluetooth-enabled mobile device through the TV’s speakers.
• SoftAP: Enables the TV to function as a 2.4 GHz wireless access
point for up to five devices. Note that a wired network connection
MUST be established in order for guests to use SoftAP.
Note: See also Reference section, “Using Media Share Features” for
additional information on these features.
1. With the Network Menu on display, use the arrow keys on the
Installer Remote to select Media Share. Then, press OK.
2. In the Media Share screen, all features may be toggled from
DISABLE to ENABLE and vice versa as follows: Use the Up/Down
arrow keys on the Installer Remote to select/highlight the desired
feature, and then press OK.
3. If you intend to enable SoftAP, make sure to complete the SoftAP
access conguration as follows:
• To enable use of a randomly generated security key for SoftAP
access, set the Use Default eld to “ENABLE” (the Security Key
eld will subsequently be grayed out and the random security key
will be displayed).
• To specify your own security key for SoftAP access, set the Use
Default eld to “DISABLE.” Then, select the Security Key eld
and press OK. In the data entry eld, you can use the number
keys on the Installer Remote to direct enter a numeric security
key, or you can use the arrow keys to select the appropriate
alphanumeric characters—at least eight, but no more than 64—
from the pop-up virtual keyboard displayed at the bottom of the
screen. Note that the security key may not contain any special
characters (:, /, \, @, etc.). When you are done, select Enter from
the virtual keyboard, and then press OK on the Installer Remote.
^
(Continued on next page)
Notes:
• SoftAP is only available with CPU
v3.02.17 or later.
• Bluetooth Sound Sync is only
available with CPU v3.02.33 or later.
Also, if you enable Bluetooth Sound
Sync, a pop-up conrmation banner
will be displayed since enabling
Bluetooth Sound Sync renders
Wireless LG Sound Sync unavailable.
Select Conrm to continue.
ENABLE
DISABLE
DISABLE
DISABLE
DISABLE
DISABLE