LG 32LY760H - Page 75

75
206-4259
Reference: Using Media Share Features (Cont.)
(Continued from previous page)
6. To access media les/folders on the TV, press SMART on the Installer Remote, and use the Left/Right
arrow keys to select SmartShare from the TV’s Smart Launcher.
Note: If the TV is not in Pass-through Mode, you can also access Smart Share from the General Menu.
Note: The example at left
shows the General Menu when
the TV is in Pass-through Mode.
The Wi-Fi Direct screen is the
same whether the TV is or is
not in Pass-through Mode.
Quick
Picture
Sound
General
Safety
Accessibility
WI - FI DIRECT
[TV]LG Smart TV
ON
REFRESH LIST
Quick
Picture
Sound
General
Safety
Accessibility
GENERAL
Language
Room Info
Time & Date
Timers
Standby Light
O
Home/Store Mode
SIMPLINK
Set ID
1
Wi-Fi Direct
TV Name LG Smart TV
^
^
7. In the Smart Share screen, select the desired Smart Share device, and then select the desired media
category to view les.
Screen Share (Miracast / WiDi)
The following steps describe how to access and use the Miracast / WiDi features.
1. Turn ON the TV, and press SMART on the Installer Remote to display the TV’s Smart Launcher.
2. Use the Left/Right arrow keys on the Installer Remote to select Screen Share, and then press OK.
Note: If Screen Share is currently not available in the Smart Launcher, you may need to turn OFF
another Media Share feature in order to use Screen Share. For example, access the General Menu
and make sure that SoftAP is turned OFF. See also note on previous page regarding simultaneous
use of Media Share features.
3. Follow the on-screen instructions to initiate the Miracast / WiDi connection from your Miracast / WiDi
device. Note that you may be prompted to enter a PIN number that appears on the TV screen into your
Miracast / WiDi connection window to complete the connection.
Once the connection is established, the TV display may be used as a second screen for the Miracast /
WiDi device.
Bluetooth Sound Sync
The following steps describe how to access and use the Bluetooth Sound Sync feature.
1. Turn ON the TV, and then press SMART on the Installer Remote to display the TV’s Smart Launcher.
(Continued on next page)