EasyManuals Logo

LG 32MN58HM User Manual

LG 32MN58HM
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
9
ENGENGLISH
Using the kensington security system
(This is not available for all models.)
Image shown may differ from your monitor.
The Kensington security system connector is located at the rear of the
monitor. For more information of installation and using, refer to the
manual provided with the Kensington security system or visit
http://www.kensington.com.
Connect the Kensington security system cable between the monitor
and a table.
NOTE
The Kensington security system is optional. You can obtain
additional accessories from most electronics stores.
Mounting on a wall
Install the monitor at least 100 mm away from the wall and leave
about 100 mm of space at each side of the monitor to ensure
sufficient ventilation. Detailed installation instructions can be
obtained from your local retail store. Alternatively, please refer to the
manual for how to install and set up a tilting wall mounting bracket.
100 mm
100 mm
100 mm
100 mm
To install the monitor to a wall, attach a wall mounting bracket
(optional) to the back of the monitor. Make sure that the wall
mounting bracket is securely fixed to the monitor and to the wall.
1 If you use screws longer than the standard length, it may
damage the inside of the product.
2 A non-VESA standard screw may damage the product and cause
the monitor to fall. LG Electronics is not liable for any accidents
relating to the use of non-standard screws.
Model 32MN58HM
Wall Mount
(A x B)
A
B
200 x 100
Standard screw M4 x L10
Number of screws 4
Wall mount bracket
(optional)
LSW140B
CAUTION
Disconnect the power cord first, and then move or install the
monitor. Otherwise electric shock may occur.
If you install the monitor on a ceiling or slanted wall, it may fall
and result in severe injury.
Use an authorized LG wall mount and contact the local dealer or
qualified personnel.
Do not over tighten the screws as this may cause damage to the
monitor and void your warranty.
Use the screws and wall mounts that meet the VESA standard. Any
damages or injuries by misuse or using an improper accessory are
not covered by the warranty.
Screw length from outer surface of back cover should be under
8 mm.
NOTE
Use the screws that are listed on the VESA standard screw
specifications.
The wall mount kit includes an installation manual and necessary
parts.
The wall mount bracket is not provided. You can obtain additional
accessories from your local dealer.
The length of screws may differ depending on the wall mount.
Make sure to use the proper length.
For more information, refer to the manual supplied with the wall
mount.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LG 32MN58HM and is the answer not in the manual?

LG 32MN58HM Specifications

General IconGeneral
BrandLG
Model32MN58HM
CategoryMonitor
LanguageEnglish

Related product manuals