WATCHING TV / CHANNEL CONTROL
30
WATCHING TV / CHANNEL CONTROL
TURNING ON TV
Installation guide menu appears on TV screen when it is turned on for the
first time.
Press the
FF
or
GG
button and then
EENNTTEERR
button to select your desired
language.
Press the
FF
or
GG
button and then
EENNTTEERR
button to select your desired
location.
If your TV will be turned on, you will be able to use its features.
First, connect power cord correctly.
At this moment, the TV switches to standby mode.
■
In standby mode to turn TV on, press the ,
IINNPPUUTT
,
CCHH ((
DD
or
EE
))
button on the TV or press the
PPOOWWEERR
,
TTVV
,
IINNPPUUTT
,
CCHH((
DD
or
EE
))
,
NNuummbbeerr ((00
~
99))
button on the remote control.
IInnssttaallllaattiioonn GGuuiiddee
If the OSD (On Screen Display) is displayed on the screen as figure after
turning on the set, you can adjust the Language, Location, Auto tuning.
LLooccaattiioonn
** IInn--SSttoorree::
It maintains the picture mode optimized for the shop environ-
ment. It maintains the picture mode as ‘dynamic’ at a specific interval.
It’s not available to use Low Power.
** HHoommee::
The user can adjust the picture mode to use.
Note: In order to reset the installation guide, select Factory Reset at the
Option menu. (
GG
pp..3399
)
GG
If you intend to be
away on vacation,
disconnect the power
plug from wall power
outlet.
Press the
CCHH ((
DD
or
EE
))
or
NNUUMMBBEERR
buttons to select a channel number.
1
VOLUME ADJUSTMENT
CHANNEL SELECTION
Press the
VVOOLL ((
FF
or
GG
))
button to adjust the volume.
If you want to switch the sound off, press the
MMUUTTEE
button.
You can cancel the Mute function by pressing the
MMUUTTEE
or
VVOOLL ((
FF
or
GG
))
button.
Adjust the volume to suit your personal preference.
1
2
3