14
ENG
ENGLISH
Using the Kensington lock
The Kensington security system connector is located at
the back of the Monitor set.
For more information on installation and usage, refer to
the Kensington lock user manual or visit the website at
http://www.kensington.com.
Connect the Kensington security system cable between
the Monitor set and a table.
y
Take care when rotating the monitor if the cable
is connected.
y
To avoid injury when rotating the display, do not
place your fingers between the display and the
stand base.
WARNING
y
Use of the Kensington lock is optional.
The accessories can be purchased at your local
electronics store.
NOTE
Monitor head
y
The left or right side of the monitor head can be
slightly rotated up or down (up to 3°). Adjust the
horizontal level of the monitor head.
NOTE
To Next Page
Loading...
