19
ENG
ENGLISH
Connecting to External Devices
Connecting Headphones
Connect peripherals to the monitor via the headphones
port. Connect as illustrated.
y
Peripheral devices are sold separately.
y
If you use angled earphones, it may cause a prob-
lem with connecting another external device to
the monitor. Therefore, it is recommended to use
straight earphones.
Angled Straight
y
Depending on the audio settings of the PC and
external device, headphones and speaker functions
may be limited.
NOTE
NOTE
Connecting Peripherals
USB Cable connection - PC
The USB port on the product functions as a USB hub.
Please connect the USB C-C or USB C-A cable to the PC.
y
Make sure to install the most recent Windows OS
service pack before using the product.
y
Peripheral devices are sold separately.
y
A keyboard, mouse, or USB device can be
connected to the USB port.
y
When Quick Charge is set to On and upstream cable is
not connected, data transmission through the USB1/2
port is not available (e.g. connecting your keyboard,
mouse, or other USB storage devices to the monitor).
(Go to General > Quick Charge to set Quick
Charge to On or Off .)
y
The charging speed may vary depending on the
device.
Cautions When Using a USB Device
y
A USB device with an automatic recognition
program installed, or that uses its own driver, may
not be recognized.
y
Some USB devices may not be supported or may
not work properly.
y
It is recommended to use a USB hub or hard disk
drive with power supplied. (If the power supply
is not adequate, the USB device may not be
recognized properly.)
y
If Quick Charge is off and the upstream Port is
not connected with Host PC, monitor may not
support ‘Charge’ .
CAUTION
(sold separately)
(sold separately)
To Next Page
Loading...
