TV MENU
/
STATION MENU OPTIONS
51
1
52
All stations that can be received are stored by this method.
It is recommended that you use auto programme during
installation of this set.
AUTO PROGRAMME TUNING
(IN ANALOGUE MODE)
Press the
MMEENNUU
button and then
D
or
E
button to
select the STATION menu.
Press the
G
button and then
D
or
E
button to select
Auto programme.
Press the
G
button to select System. Select a TV
system with the
F
or
G
button;
L : SECAM L/L’ (France)
BG : PAL B/G, SECAM B/G (Europe / East Europe /
Asia / New Zealand / M.East / Africa / Australia)
I : PAL I/II (U.K. / Ireland / Hong Kong / South
Africa)
DK : PAL D/K, SECAM D/K (East Europe / China /
Africa / CIS)
Press the
E
button to select Storage from.
Select the beginning programme number with the
F
or
G
button or NUMBER buttons on the Storage
from menu.
Press the
E
button to select Start.
The station name is stored for stations which broad-
cast VPS (Video Programme Service), PDC
(Programme Delivery Control) or TELETEXT data.
If no station name can be assigned to a station, the
channel number is assigned and stored as C (V/UHF
01-69) or S (Cable 01-47), followed by a number.
To stop auto programming, press the
MMEENNUU
button.
When auto programming is completed, the
Programme edit menu appears on the screen.
See the ‘Programme edit’ section to edit the stored
programme.
Auto programme G
Manual programme
Programme edit
Favourite programme
System
Storage from
Start
BG
2
To Next Page
Loading...
