Screen Setup for PC mode
Overview
When the RGB input of the set is connected to a PC Output,
Select RGB-PC with using the INPUT button on the remote
control.
When you change the resolution, select the proper resolution
in present input to see the best picture appearance.
Adjustment for screen Resolution, Position,
Size, and Phase
O Press the ADJUST button and then use A or • button to
select Resolution, Position, Size, or Phase.
0
0
Press the ENTER button and then use A • _1 I_ button to
make appropriate adjustments.
• The Phase adjustment range is -16 ~ +16.
• The Size adjustment range is -30 ~ +30.
Press the ENTER button.
For PlasmaTV
For LCD TV
@@@
Resolution This function allows you select
resolution of XGA/WXGA.
Position This function is to adjust picture to
left/right and up/down asyou prefer.
Size This function isto minimize any ver-
tical bars or stripes visible on the
screen background. And the hori-
zontal screen size will also change.
Phase This function allows you to
remove any horizontal noise and
clear or sharpen the image of char-
acters.
m
x
m
z
m
X:)
c
m
z
m
c
29
To Next Page
Loading...
