SimpLink Functions
_Direct Play: After connecting AV devices to TV, you can directly control the
devices and play media without additional settings.
Select AV device: Enables you to select one of AV devices connected to TV and
play it.
Disc playback: Control connected AV devices by pressing the _ , _ ,
, , , _ , _, • V _I I_, ENTER buttons and buttons for play, stop, pause,
fast reverse, fast forward, chapter skip.
01_Power off all devices: When you power off TV, all connected devices are turned off.
(This option only applied when the devices are stoped.)
_Switch audio-out: Offers an easy way to switch audio-out.
(A device, which is connected to TV through HDMI cable but does not support
SimpLink, does not provide this function)
Note: To operate SIMPLINK, the HDMI cable over 1.2 Version with _CEC function
should be used. (_CEC: Consumer Electronics Control).
O fter selecting the TV button of the MODE on the remote control,
press the SlMPLINK button.
O Use A • _ I_ button to select the desired device and then
press
the ENTER button.
O Control connected AV devices by pressing the
_, _, , , A•_I I_, ENTER buttons.
@0
z
-q
-r-
z
z
m
N
O
Z
-q
O
SimpLink Menu
@ TV viewing: Switch to the previous TV
channel regardless of the current mode.
@ DISC playback: Select and play discs.
When multiple discs are available, the titles
of discs are conveniently displayed at the
bottom of the screen.
@ VCR playback: Play and control the con-
nected VCR.
@ HDD Recordings playback: Play and
control recordings stored in HDD.
@ Audio Out to HT speaker/Audio
Out to TV: Select HT speaker or TV
speaker for Audio Out.
Selected Device
When no device is connected
(displayed in gray)
When a device is connected
(displayed in bright color)
41
To Next Page
Loading...
