LG 47VS20 - Portrait Layout

13
ENG
ENGLISH
ASSEMBLING AND PREPARING
Portrait Layout
-Onlyonsomemodels.
WheninstallinginaPortraitLayout,rotatethe
monitorclockwise90degrees(whenfacingthe
screen).
Using the Kensington security system
TheKensingtonsecuritysystemconnectoris
locatedatthebackoftheMonitorset.Formore
informationofinstallationandusing,refertothe
manualsuppliedwiththeKensingtonsecurity
systemorvisit http://www.kensington.com .
ConnecttheKensingtonsecuritysystemcable
betweentheMonitorsetandatable.

TheKensingtonsecuritysystemisoptional.
Youcanobtainadditionalaccessoriesfrom
mostelectronicsstores.
NOTE

Using the FFC/IR PCB
(Only for 47VX30AF model)
1
 Removethesecuringtapefirst.
2
 DonotpullouttheFFC,asthismaycause
damage.
3
 Becarefulnottodamagetheproductduring
installation.
47VX30AF