LG 47WL30MS - Page 79

79
ENG
ENGLISH
CONTROLLING THE MULTIPLE PRODUCT
04. Energy Saving (Command: j q)
TosettheEnergySavingfunction.
Transmission
[j][q][][SetID][][Data][Cr]
Data 00:Off
 01:Minimum
 02:Medium
 03.Maximum
 04:Auto
 05.ScreenOff
Acknowledgement
[q][][SetID][][OK/NG][Data][x]
**Itmaynotbesupporteddependingonthemodel.
05. Picture Mode (Command: d x)
ToselectthePictureMode.
Transmission
[d][x][][SetID][][Data][Cr]
Data 00:Vivid
 01:Standard
 02.Cinema
 03.Sport
 04:Game
Acknowledgement
[x][][SetID][][OK/NG][Data][x]
06. Contrast (Command: k g)
Toadjustthescreencontrast.
Transmission
[k][g][][SetID][][Data][Cr]
Data 00to64:Contrast0to100
Acknowledgement
[g][][SetID][][OK/NG][Data][x]
01. Power (Command: k a)
TocontrolthePowerOn/Offthedisplay.
Transmission
[k][a][][SetID][][Data][Cr]
Data00:Off
 01:On
Acknowledgement
[a][][SetID][][OK/NG][Data][x]
*Onlywhenthemonitorsetisfullypoweredon,the
Acknowledgementsignalisreturnedproperly.
*Theremaybeacertaintimeofdelaybetweenthe
TransmissionandAcknowledgementsignals.
02. Input Select (Command: x b)
ToselecttheInputSourcefordisplay.
Transmission
[x][b][][SetID][][Data][Cr]
Data 20:Input(AV)
 40:Component
 60:RGB
 70:DVI-D(PC)
 80:DVI-D(DTV)
 90:HDMI(HDMI1)(DTV)
 A0:HDMI(HDMI1)(PC)
 C0:DisplayPort(DTV)
 D0:DisplayPort(PC)
 91:HDMI2/SDI(DTV)
 A1:HDMI2/SDI(PC)
 B0:SuperSign
Acknowledgement
[b][][SetID][][OK/NG][Data][x]
*Someinputsignalsmaynotbesupported
dependingonthemodel.
03. Aspect Ratio (Command: k c)
Toadjustthescreenformat.
Transmission
[k][c][][SetID][][Data][Cr]
Data 01:4:3
 02:16:9
 04:Zoom
 (AV,Component,HDMI/DVI-D/DisplayPortDTV)
 09:Justscan(720pormore)
 (Component,HDMI/DVI-D/DisplayPortDTV)
 *RGB,DVI-D,HDMI/DisplayPortPCmode(1:1)
 10to1F:CinemaZoom1to16
 (AV,Component,HDMI/DVI-D/DisplayPortDTV)
*Availabledatatypesdifferdependingontheinput
signal.Formoreinformation,seetheaspectratio
sectionoftheowner'smanual.
*Theaspectratiomaydifferdependingonthe
model'sinputconfiguration.
Acknowledgement
[c][][SetID][][OK/NG][Data][x]