LG 47WL30MS - Connecting the Stand; Connecting the Speaker

8
ENG
ENGLISH
ASSEMBLING AND PREPARING
2
 Usethescrewstosecurethestandontherear
sideoftheproductasshowninthediagram.
Connecting the Stand Connecting the Speaker
-Onlyonsomemodels.
1
 Placeasoftclothonthetableandputthe
productwiththescreenfacingdownward.
-Onlyonsomemodels.
1
 Connecttheinputsignalcabletothemonitor
beforeinstallingthespeakers.Useacabletie
toorganizethecables.
3
 Thenconnectthespeakercable.Afterinstalling
yourspeakers,useholdersandcabletiesto
organizethespeakercables.
2
 Mountthespeakerbyusingascrewasshown
inthefollowing.Makesurethepowercableis
disconnected.