15
Expert Controls
General Expert Controls
PC/OPS Control
• PC/OPS Power Control: Enable you to control the power of the OPS as you turn on/off the display.
- Disable: Disable OPS Power Control.
- Sync (On): Synchronize the monitor's power status only when the monitor is on.
- Sync (On/Off): Synchronize the monitor's power status with the OPS.
• Control Interface Selection: This feature enables you to configure communication with the OPS connected to your
monitor.
- Display: Enable communication with external serial ports.
- OPS: Enable communication with the OPS connected to your monitor.
• This feature may not be available for all models.
Background Image
This feature enables you to set the default background image.
• Booting Logo Image: Change the logo image that appears when the device boots up. If you set this feature to Off,
the Booting Logo does not appear.
- Image Download: Download Booting Logo Image files onto your monitor. In order to download a Booting Logo
Image, there must be a Booting Logo Image file in a “LG_MONITOR” on your USB storage device.
NOTE
• The feature to update the Booting Logo Image only supports JPEG files of 1 MB or smaller can be used as Booting
Logo Images.
• Progressively encoded JPEG files are not applicable.
• Make sure that Booting Logo Images have a resolution suitable for the screen resolution of the monitor.
• The maximum resolution for a Booting Logo Image is Full HD (1920 x 1080) and HD (1360 x 768). The minimum
resolution for a Booting Logo Image is 64 x 64.
• No Signal Image: Change the image that appears when there is no signal. If you set this option to Off, no image
appears when there is no signal.
- Image Download: Download No Signal Image files onto your monitor. In order to download an image, there must
be an No Signal Image file in a “lg_sig” or “LG_SIG” folder on your USB storage device. The maximum total size of
images to be downloaded: The total size should not exceed 10240KB (10MB).
NOTE
• The feature to update No Signal Images only supports JPEG files of 1 MB or smaller.
• Progressively encoded JPEG files are not applicable.
• The maximum resolution for a No Signal Image is Full HD (1920 x 1080) and HD (1360 x 768). The minimum
resolution for a Booting Logo Image is 64 x 64.
• No Signal Image files with a resolution of Full HD (1920 x 1080) can cause image sticking.
• Only No Signal Image files with English names are displayed correctly.
To Next Page
Loading...
Need help?
General
