LG 55EG9600 - IMPORTANT SAFETY INSTRUCTIONS; Environmental, Installation, and Component Safety

55EG9600 (2015) Service Menu
November 2018
LG
Model Name: :55EG9600-UA
Serial Number: :508RMEN3C828
S/W Version : 04.05.60.01
MICOM Version :V2.21.0
BOOT Version :72/3.00.73-73
URSA Version :OK(0x6212)
Chip Type :LM15U
Wi-Fi Channel :1
Wi-Fi MAC : 4C:09:D4:CD:15:8E
Wi-Fi Speed : USB 2.0
MAC Address : C8:08:E9:1E:3B:86
IP Address :192.168.50.78
SFU Key : OK
Widevine : LGTV15CMSD002116399
ESN Num. : LGTV20154=41011841353
HDCP2(Miracast/HDMI) : OK/OK
DTCP :OK
RF Receiver Version :1.2.7.80
Wi-Fi/Magic Search :OK/OK
Camera Ver. : NULL
Debug Status :RELEASE
SIGN Key :PRODKEY
Eye Check :OK
Control Key NG:
Access USB Status: 1/-1(T)/-1(C)
UTT : 25
OLED Last Compensation Done UTT:20
OLED Compensation Count : 7
APP History Ver : 2142
PQL DB: OLED SI2178B_BE_XXXXXX
Video : NULL
IN START
1. Adjust Check
2. ADC Data
3. Power Off Status
4. System 1
5. System 2
6. System 3
7. Model Number D/L
8. Test Option
9. Spread Spectrum
10. Stable Count
11. SDP Server Selection
12. RF Remocon Test
13. Access Code
Power Off Status
Bring up the Service Menu using the Service Remote
by pressing “In-Start” enter password 0413 or 0000.
55EG9600 Power On/Off Status (IN START) Screen
Most Recent
0. POWER_ON_BY_REMOTE_KEY
1. POWER_OFF_BY_REMOTE_KEY1
2. POWER_ON_BY_LAST_POWERON
3. POWER_OFF_BY_LOCAL_KEY
4. POWER_ON_BY_LAST_POWERON
5. POWER_OFF_BY_ACDET
6. POWER_ON_BY_SW_DL
7. POWER_OFF_BY_SW_DL
8. POWER_ON_BY_REMOTE_KEY1
9. POWER_OFF_BY_LOCAL_KEY
10. POWER_ON_BY_LOCAL_KEY
11. POWER_OFF_BY_REMOTE_KEY1
12. POWER_ON_BY_LAST_POWERON
13. POWER_OFF_BY_ACDET
14. POWER_ON_BY_LOCAL_KEY
15. POWER_OFF_BY_LOCAL_KEY
16. POWER_ON_BY_LOCAL_KEY
17. POWER_OFF_BY_LOCAL_KEY
18. POWER_ON_BY_LOCAL_KEY
19. POWER_OFF_BY_REMOTE_KEY1
20. POWER_ON_BY_LAST_POWERON
21. POWER_OFF_BY_ACDET
22. POWER_ON_BY_SW_DL
23. POWER_OFF_BY_SW_DL
Power On/Off Status
Select Item 3
Page 03
The WebOS In-Start menu now includes the Power Off/On Status. In other words, the
reason the TV turned On or Off the last time.
Example: POWER_ON_BY_LAST_POWERON indicates the TV was ON when AC was
removed. When AC was returned, the TV turned on into the Last State in was in before
power loss. So just below that entry should be POWER_OFF_BY_AC_DET.
Note: You can scroll up or down to reveal the last
126 reasons for Turn On or Off.