LG 55EG9600 - Viewing 3 D Imaging; Health, Environment, and Age Considerations for 3 D

LG
November 2018
55EG9600 IN-START “Power On Status” Details (3 of 3)
55EG9600 (2015) In-Start Menu
Page 06
MODE Contents Action
POWER_ON_BY_AMAZON power on by amazon hot key (webOS 3.5 or later) None
POWER_ON_BY_CH_UPDATE_TIMER Power on by channel update in warm stand-by (for Italy model.) None
POWER_ON_BY_COMPENSATION_FAIL Cancel the OLED compensation for user DC on. (OLED up to webOS 2.0) SW, Main, Panel
POWER_ON_BY_COOLINGDONE
When completed the cooling action(t-con cooling), TV will be DC on with warm
condition. , (OLED after webOS 3.0)
None
POWER_ON_BY_CPU_ABNORMAL Power off by CPU checking abnormal behavior Main, IR, Wifi
POWER_ON_BY_EITTIMER Power on by Japan-model EIT (event information table). None
POWER_ON_BY_EWBS When detect the EWBS signal, TV is auto turn on by EWBS. (in warm condition) None
POWER_ON_BY_EWBS_OK Power on by EWBS alert function (hot condition) None
POWER_ON_BY_HDMI_CEC Power on by HDMI CEC message "image view on" and "text view on". None
POWER_ON_BY_LAST_COOL Cycle into muted power on for compensation activity, (after webOS 3.0) None
POWER_ON_BY_LAST_POWERON
String for from HOT status to Power on automatically
(In general, with Power On status, AC off/on happens.)
None
POWER_ON_BY_LAST_SUSPEND Power on by suspend mode None
POWER_ON_BY_LAST_WARM When AC on after 1st in-stop, TV auto turn on warm state. (webOS3.5~) None
POWER_ON_BY_LOCAL_KEY Power on by local key function. None
POWER_ON_BY_MICOM_PWR_OFF_ON
String for Auto Power Off/On
(micom Reboots by PLL_FAIL / COMP_FAIL / RESET and so on. )
None
POWER_ON_BY_NETFLIX Power on by netflix hot key None
POWER_ON_BY_ON_TIMER Power on by on timer function. None
POWER_ON_BY_OPERATOR_SEARCH_TIMER Power on at reservation time for CI plus operator search. None
POWER_ON_BY_PNWASHDONE Power on by panel noise wash function complete. (OLED) None
POWER_ON_BY_PNWASHFAIL Cancel the panel noise wash fucntion for user DC on. SW, Main, Panel
POWER_ON_BY_POWER_ONLY Power on by p-only remote key or UART command None
POWER_ON_BY_QUICK_START Auto on by QSM+ function after power off by quick start. None
POWER_ON_BY_REMIND Power on by remind function. None
POWER_ON_BY_REMOTE_KEY Power on by remote Power Key. None
POWER_ON_BY_RESERVE Power on by reserve function. None
POWER_ON_BY_RS232C Power on by RS-232C command None
POWER_ON_BY_STORE_POWERON Power on by store-only remote. None
POWER_ON_BY_SWDOWN Reboot by s/w down load function None
POWER_ON_BY_WEAVE Power on by IOT device None
POWER_ON_BY_WOBLE When detect BLE signal, TV will be auto DC on. None
POWER_ON_BY_WOL_ONOFF Power on by Wake On Lan from external device through network. None
POWER_ON_BY_WOW_ONOFF Power on by Wake on Wifi None
UNKNOWN Power on/off by other reason. (abnormal case) Main, IR, Wifi