LG 55LV35A5BC Easy Setup Guide

11
ENG
ENGLISH
TILING DISPLAYS
How to Join Sets
y
The load applied to each set should be supported by the wall mount plate or the wall using a VESA
wall mount (600 x 400).
y
The load applied to each set should be supported by the wall mount plate using a VESA wall mount.
(Each set must be firmly mounted to the wall mount plate or the wall.)
y
You may mount the set without using the tiling guide; this does not affect the performance of the
device.
y
Loosen the screws on the set to install the tiling guides. (The screws are enclosed with the other
components in the box, including the tiling guides.)
NOTE
Set 4 joined to the rest of the sets
(2 x 2 tiling)
1 Join other sets using screws for fixing the
VESA wall mount in the same way as above.
2 After joining the sets, use the tiling guide to
adjust the gap between the sets.
3 Now the 2 x 2 tiling is complete. You can tile in
various combinations, such as 3 x 3.
55LV35A
Set 4 joined to the rest of the sets
(2 x 2 tiling)
1 Join other sets using screws for fixing the
VESA wall mount in the same way as above.
2 After joining the sets, use the tiling guide to
adjust the gap between the sets.
3 Now the 2 x 2 tiling is complete. You can tile in
various combinations, such as 3 x 3.
47LV35A

LG 55LV35A5BC Specifications

General

Brand	LG
Model	55LV35A5BC
Category	Digital Signage
Language	English