To Next PageTo Next PageWhy does after-image appear on my LG 55SE3D?
An after-image appearing on your LG Digital Signage can occur if you use a fixed image for a long time, potentially damaging the pixels. Use the screen-saver function to prevent this. Also, when a dark image is displayed on the screen after an image with high contrast (black and white or gray), this is normal for LCD screen products.
What to do if the audio function does not work on my LG Monitor?
If the audio function on your LG monitor isn't working, consider these steps: * Check if the audio cable is properly connected. * Adjust the volume settings. * Ensure the sound is set correctly. * Select an appropriate equalizer sound. * Adjust the volume once more to ensure it's not muted or too low.
What to do if the operation does not work normally on my LG Monitor?
If your LG Monitor isn't operating normally, check these: * See if the Timer is set. * Examine the power control settings. * Consider whether the power has been interrupted.
What to do if the 'Unknown Product' message appears when my LG Monitor is connected?
If the 'Unknown Product' message appears when your LG monitor is connected, check if the Plug and Play function is supported by referring to the graphics card user manual.
How to fix audio function if it does not work on LG 55SE3D Digital Signage?
To fix the audio function on your LG Digital Signage, first see if the audio cable is connected properly. Then, adjust the volume and see if the sound is set properly. Also, select the appropriate equalizer sound and adjust the volume again.
Why does LG 55SE3D show 'Unknown Product' message?
If the 'Unknown Product' message appears when your LG Digital Signage is connected, check if the Plug and Play function is supported by referring to the graphics card user manual.
What to do if operation does not work normally on LG 55SE3D Digital Signage?
If the operation of your LG Digital Signage does not work normally, check if the Timer is set, verify the power control settings, and ensure there were no power interruptions.
What to do if the 'Unknown Product' message appears when connecting my LG Digital Signage?
If the 'Unknown Product' message appears when connecting your LG Digital Signage, check if the Plug and Play function is supported by referring to the graphics card user manual.
How to prevent after-image on LG 55SE3D?
If you notice an after-image appearing on your LG Digital Signage, especially after displaying a fixed image for an extended period, it may be due to pixel damage. To prevent this, use the screen-saver function. Also, when a dark image is displayed after a high contrast image, image sticking may occur, which is normal for LCD screens.
What to do if the audio function does not work on LG Digital Signage?
If the audio function on your LG Digital Signage isn't working, first check if the audio cable is properly connected. Then, ensure the volume is adequately adjusted and the sound is set correctly. You may also want to select an appropriate equalizer sound and re-adjust the volume.
Safety guidelines for the proper installation of the product.
Troubleshooting steps for when the product displays no image.
Solutions for after-image or image sticking problems.
Troubleshooting steps for audio not working or poor sound quality.
Solutions for issues with screen color or stability.
Troubleshooting steps for general operation issues.
Safety guidelines for the proper installation of the product.
Troubleshooting steps for when the product displays no image.
Solutions for after-image or image sticking problems.
Troubleshooting steps for audio not working or poor sound quality.
Solutions for issues with screen color or stability.
Troubleshooting steps for general operation issues.
General| Screen Size | 55 inches |
|---|---|
| Panel Type | IPS |
| Viewing Angle (H x V) | 178° x 178° |
| Operating Hours | 24/7 |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Standby Power Consumption | 0.5 W |
| VESA Mount | 300 x 300 mm |
| Resolution | 1920 x 1080 |
| Contrast Ratio | 1200:1 |
| Input | HDMI, USB |
| Output | Audio Out |
| External Control | RS-232C, Ethernet |
| Orientation | Landscape & Portrait |
| Response Time | 12ms (G to G) |
| Bezel Width | 11.9mm (Even Bezel) |
