How to fix the audio if it does not work on my LG Monitor?
If the audio function is not working on your LG Monitor, first check if the audio cable is connected properly. Then, adjust the volume settings and ensure the sound is set appropriately. You may also want to select the appropriate equalize sound. Adjust the volume.
What to do if the screen color is abnormal on my LG 65VS10?
If the screen color on your LG Monitor appears abnormal, try setting the number of colors to more than 24 bits (true color) by selecting Control Panel - Display - Settings - Color Table menu in Windows. Also, check the connection status of the signal cable, and if necessary, re-insert the PC video card. Note that several pixels (red, green, white or black color) may appear on the screen, which is attributable to the unique characteristics of the LCD panel and not a malfunction.
What to do if the screen image looks abnormal on my LG 65VS10?
If the screen image looks abnormal on your LG Monitor, press the "AUTO" button on the remote control to automatically select the optimal screen status. If adjustment is not satisfactory, use the Position, Clock or Phase OSD menu. Ensure the proper input signal is connected to the signal port by connecting the signal cable that matches the source input signal.
What to do if my LG 65VS10 Monitor displays 'Unknown Product' message?
If your LG Monitor displays an 'Unknown Product' message when connected, install the product driver provided with the monitor or download it from the LG website (http://www.lg.com). Also, verify if the plug&play function is supported by referring to the video card user manual.
Why does 'Key Lock On' message appear on my LG 65VS10?
The 'Key Lock On' message appears on your LG Monitor because the control locking function is enabled, preventing unintentional OSD setting changes. To unlock the controls, simultaneously press the Menu button and the ? button for several seconds. Note that this function can only be set on the product itself, not via the remote control.
Why does after-image appear on my LG 65VS10 Monitor?
If an after-image appears on your LG Monitor, it may be due to using a fixed image for an extended period, which can damage pixels. To prevent this, use the screen-saver function.
Why is no image displayed on my LG 65VS10?
There are several reasons why your LG Monitor might not be displaying an image. First, ensure the power cord is properly connected to the outlet and that the power switch is turned on. Next, adjust the brightness and contrast settings. If the monitor is in power saving mode, move the mouse or press any key. Check the signal cable between the PC and the monitor, and make sure it's securely connected. Press the 'INPUT' menu in the remote Control to check the input signal. Also, verify that the signal from your PC (video card) is within the monitor's vertical or horizontal frequency range, referring to the specifications for the correct range. Maximum resolution RGB : 1920 x 1080 @ 60 Hz HDMI/DVI : 1920 x 1080 @ 60 Hz. Backlight may need repair. May need service. Turn both devices off and the...
Identifies and explains the function of physical buttons and connection ports.
Explains the purpose and operation of each button on the remote control.
Describes how to access and use the monitor's OSD menus and navigation buttons.
Guides on connecting a PC and choosing the correct input source.
Options for adjusting image quality, aspect ratio, and picture modes.
Settings for RGB mode screen options and fundamental image adjustments.
Configuration options for audio output, including volume and sound modes.
Solutions for issues like no image, 'Out of range', or 'Check signal cable' messages.
Troubleshooting for 'Key Lock On' messages, abnormal screen images, and after-images.
Guidance for resolving problems with sound, screen color, and general operation.
Setup for controlling multiple units via RS-232C, including cable and communication parameters.
Detailed table of commands, data formats, and functions for external control.
To Next Page
General
