23
ENG
ENGLISH
CUSTOMIZING SETTINGS
Setting Description
Interface Select Sets up network connections.
Option
RS-232C Enables communication via Serial.
Network LAN - Enables communication via Ethernet.
Network Setup Option
DHCP Allocates and sets up IP automatically.
Manual Sets up IP address, Gateway, Subnet Mask, Primary DNS and Secondary
DNS.
The setup process is complete when you select Execute, and "IP Setup
Completed" is displayed at the bottom of the screen. While "Wait for IP Setup"
is displayed, you cannot use the local keys and remote control. "Wait for IP
Setup" is displayed for up to 40 seconds.
* If Network select is set to RS232C.DHCP and Manual are disabled.
Information You can find informations about Serial No, F/W version, IP Address and MAC Address.
Factory Reset Select this option to return to the default factory settings.
To Next Page
Loading...
