LG 65VS10 - Page 59

59
ENG
ENGLISH
EXTERNAL CONTROL DEVICE SETUP
43. DPM Select (Command: f j)
Set the DPM (Display Power Management) function.
Transmission
[f][j][ ][Set ID][ ][Data][Cr]
Data 00 : Off
01 : On
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
44. Reset (Command: f k)
Set the DPM (Display Power Management) function.
Transmission
[f][k][ ][Set ID][ ][Data][Cr]
Data 00 : Picture Reset
01 : Screen Reset
02 : Factory Reset
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
45. Power saving (Command: f l)
To set the Power saving mode.
Transmission
[f][l][ ][Set ID][ ][Data][Cr]
Data 00 : Off
01 : static level 1
02 : static level 2
03 : static level 3
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
46. Power Indicator (Command: f o)
To set the LED for Power Indicator
Transmission
[f][o][ ][Set ID][ ][Data][Cr]
Data 00 : Off
01 : On
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
47. Serial no.Check (Command: f y)
Check the Serial no.
Transmission
[f][y][ ][Set ID][ ][Data][Cr]
Data FF (to read the serial numbers)
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data1] to [Data13][x]
* The data format is ASCII Code.
48. S/W Version (Command: f z)
Check the software version.
Transmission
[f][z][ ][Set ID][ ][Data][Cr]
Data FFH : Read
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]