38
USER SETTINGS
ENGLISH
Tips for Wireless Network Setting
Wireless networks can be subject to interference from other devices operating at a frequency of 2.4
GHz (wireless phones, Bluetooth devices or microwave ovens). There may also be interference from
devices with a frequency of 5 GHz, same as other Wi-Fi devices.
The surrounding wireless environment can cause the wireless network service to run slowly.
If you do not turn off the entire local home network, network traffic may occur on some devices.
For an AP connection, an access point device that supports wireless connection is required and the
wireless connection feature must be enabled on the device. Contact your service provider regarding
availability of wireless connection on your access point.
Check the SSID and security settings of the AP for AP connection. Refer to the appropriate
documentation for SSID and security settings of the AP.
Invalid settings on network devices (wired/wireless line sharer, hub) can cause the monitor to run slowly
or not operate properly. Install the devices correctly according to the appropriate manual and set the
network.
Connection method may differ according to the AP manufacturer.
To Next Page
Loading...
