30
MAINTENANCE
dust and foreign objects can be easily
removed.
3
Insert the crevice tool
c
into the Cyclonic Mesh
Filter
b
and turn it counterclockwise to remove
the filter.
4
Wash the Cyclonic Mesh Filter under running
water.
• To avoid odour and the malfunction of the
motor, allow the Cyclonic Mesh Filter to dry
completely in a well-ventilated area out of
direct sunlight for at least 24 hours before
reassembling.
5
Use the combination tool to clean out dust or
foreign objects inside the dust bin.
• Never wash the product body with water. Water
could reach the motor and cause electric shock
or fire.
• Do not use the product body to suck up oils or
any liquids, including water.
• Do not use the appliance without the Cyclonic
Mesh Filter installed. Doing so could damage the
product.
• Do not insert fingers or sharp objects into the
motor to avoid product damage, personal injury,
or electric shock.
• Do not allow foreign objects to reach the motor
to avoid product damage, explosion or fire.
• Do not apply force or allow impacts to the
Cyclonic Mesh Filter. Doing so could deform the
filter, compromise product performance, or
cause the product to malfunction.
Cleaning the Filters
Clean the pre-filter and exhaust filter regularly and
wash them in running water at least once a month
to maintain the optimum suction power of the
appliance.
• Clean the filters more frequently if the appliance
is used regularly or in areas with a lot of dust.
1
Remove the battery from the product body.
To Next Page
Loading...
Need help?
General
