31
MAINTENANCE
ENGLISH
2
Rotate the exhaust filter
a
to the unlocked
position
b
to separate it from the product
body.
3
Lift out the pre-filter
c
from the product body.
4
Use the combination tool
d
to clean any dust
off the motor.
• Do not wash the motor with water.
5
Clean the exhaust filter by brushing the dust
off it regularly and wash it in running water at
least once a month.
• To avoid odor and the malfunction of the
motor, allow the exhaust filter to dry
completely in a well-ventilated area out of
direct sunlight for at least 24 hours before
reassembling.
6
Clean the pre-filter by brushing the dust off it
regularly and wash it in running water at least
once a month.
• To avoid odour and the malfunction of the
motor, allow the pre-filter to dry completely
in a well-ventilated area out of direct
sunlight for at least 24 hours before
reassembling.
7
Insert the clean, dry pre-filter and rotate the
exhaust filter to the locked position
e
to
reassemble it on the product body.
• Do not use the appliance without the exhaust
filter and pre-filter installed. Doing so could
result in product damage.
To Next Page
Loading...
Need help?
General
