23
OPERATION
ENGLISH
• If the suction function is used together with
steam or wet mop cleaning, wet dust may be
inhaled and the product may smell. In dusty
areas, clean with the suction function before
cleaning with the steam or mop function.
• Do not use a soiled mop pad to clean floors.
• Clean only with the mop pads for the steam mop
nozzle provided when purchasing from LG
Electronics. The mop pads from other products
may reduce cleaning performance.
• When cleaning in the normal mop mode, if the
water adjustment buttons of the steam mop
nozzle touch the legs of a chair or table and are
pressed, the amount of water may change or the
water supply may be turned off.
• Empty the dust bin and clean the exhaust filter
and the pre-filter after using the mop nozzle.
• When using the steam mode, the warmth of the
floor may be felt differently depending on the
surrounding environment (temperature,
season, material of the floor). It's also normal for
no steam to be emitted from the mop pads as it
can be diffused by the floor or by the wet mop
pads.
To Next Page
Loading...
Need help?
General
