LG A9T Series User Manual

20
OPERATION
Getting Started
Control Panel Features
Control Panel
List Descriptions
a
Status Display The display shows the dust emptying operation status or when to replace
the dust bag, charging status of the spare battery, working status of UVC
LED and dust emptying mode.
b
Start Press the Start/Stop button once to start the dust emptying operation.
• With the
Start/Stop button is selected, a melody plays. When the
vacuum cleaner is mounted in the emptying station, the dust bin cover
opens automatically and the dust emptying operation begins.
• When you purchase the product, the manual dust emptying mode is
set by default.
Stop Press the Start/Stop button once to cancel the dust emptying operation.
• When the dust emptying operation is canceled, the product returns to
the charging status.
- In the Finishing Step(the dust bin cover closes automatically), the
Start/Stop button is inactive.
• Residual dust in the suction area may fall on the floor when the
Vacuum Cleaner is removed from the station after the dust emptying
operation is canceled.
- Once the dust emptying operation is canceled, the dust bin may not
be emptied completely and remain on the duct suction area.
- Complete the dust emptying operation before using the Vacuum
Cleaner.
Change Dust
Emptying Mode
Press and hold the Start/Stop button for at least 3 seconds to switch
between automatic or manual dust emptying mode.
c
Beep Setting Press the Beep Setting button to change beep sounds.
• Select one of three beep sound options.

LG A9T Series Specifications

General

Type	Stick
Battery Type	Lithium-Ion
Charging Time	4 hours
Filter Type	HEPA
Filtration System	5-Step Filtration
Telescopic Wand	Yes
Washable Filter	Yes
Dust Capacity	0.44L
Accessories	crevice tool, combination tool