21
OPERATION
ENGLISH
Status Display
d
UVC Mode
Press the
UVC Mode
button once to start the UVC function.
• UVC LED towards the dust bag turns on for 30 minutes when activated.
- To suppress the growth of bacteria inside the dust bag, UVC LED
automatically turns on for 2 hours every 12 hours without pressing
the
UVC Mode
button.
• Once the UVC LED is on, the button is inactive.
List Descriptions
a
Dust Emptying
(Replace Bag)
Indicator
• Indicates the dust emptying operation status or when to replace the
dust bag.
- White: Product is emptying dust.
- Flashing red: If the indicator flashes red while emptying dust, this
indicates dust bag requires replacement. At the end of dust
emptying operation, replace dust bag.
- Flashing red, beeping: If the dusty emptying operation is complete
and the dust bag is full, the indicator will flash red, beep 10 times
and then turn off.
- If the indicator flashes red, replace the dust bag to maintain product
performance.
b
Spare Battery
Indicator
• Indicates the charging status of the spare battery.
- Flashes: When the spare battery is mounted in the charger.
- On (steady): Spare battery charging is complete.
- The spare battery will not charge until the battery mounted in the
vacuum cleaner is fully charged. Check the battery level on the
handle of the vacuum cleaner to check whether charging is
complete.
c
UVC Indicator • Displays that UVC LED is on or off.
- On (Steady): When the UVC LED is activated.
List Descriptions
To Next Page
Loading...
Need help?
General
