10
Setup the Wireless System
Note:
If there is a product with a strong electromagnetic field
nearby, interference may occur.
(Ex : Micro wave oven)
Wireless TX
LED indicator of
Wireless TX
* LED indicator - “BLUE”
The main set is turned on, everthing is connected
and transmitting.
* LED indicator - “OFF (No display)”
The main set is turned off.
Wireless RX
LED indicator of
Wireless RX
* LED indicator - “BLUE”
The Wireless RX
is receiving a signal of
Wireless TX.
* LED indicator - “RED”
The
Wireless RX
is in standby mode.
Assembling and Connecting to
the Speakers
The front and rear speakers are detached from the
speaker stands. Connect the speaker cords and
assemble the front and rear speakers from speaker
stands as illustrated.
1. Connect the speaker cords to the appropriate
terminals on the bottom of each front and rear
speaker.
2. Attach the front and rear speakers to the speaker
stands by rotating the screw.
LED indicator
Displays the operating
status.
To Next Page
Loading...
