Installation
22
Installation Condition
Installing sanitary water tank requires following considerations :
• Sanitary water tank should be located at the flat place.
• Water quality should comply with EN 98/83 EC Directives.
• As this water tank is sanitary water tank (indirect heat exchange), do not use anti water-freezing
treatment like ethylene grycol.
• It is highly recommend to wash out inside of the sanitary water tank after installation. It ensures
generating clean hot water.
• Near the sanitary water tank, there should be water supply and water drain for easy access and
maintenance.
Sanitary Water Tank and Sanitary Water Tank Kit
• If hot water mode is used, make sure to install
sensor to water tank.
• Make PT15A female bolt hole in the water tank,
and install sensor in the water tank.
• Push the sensor into the hole of the sensor holder
cap.
• Lock the sensor holder cap.
Water tank temperature sensor connection
To Next Page
Loading...
