LG AHNW166T0 - Page 47

Accessories Installation
Installation Manual 47
ENGLISH
Final Check
• DIP switch setting :
Set DIP switch No. 8 to ‘ON’. Otherwise, the unit can not recognize the thermostat.
• Remote Controller :
- ‘Thermostat’ icon is displayed on the remote controller.
- Button input is prohibited.
Thermostat Icon
Thermostat Operation with Remote Controller
Following features are permitted when thermostat is installed :
• SET TEMP button
• VIEW TEMP button
• Temperature adjusting button(*)
• Sanitary water heating button
(*) : The unit is not turned on/off according to the setting temperature at the remote controller.
It is turned on/off according to the thermostat signal.
Following features are NOT permitted when thermostat is installed :
• Operating mode (heating/ weather-dependent) selection
• Time scheduling
• Operation On / Off
NOTICE
WATER
TEMP
OPER
HEATING
MODE
WATER
TEMP
OPER
HEATING
MODE
WATERWATER
TEMP
OPER
HEATINGHEATING
MODE
WATER
TEMP
OPEROPER
HEATING
MODEMODE
WATER
TEMP
OPER
HEATING
MODE
WATER
TEMP
OPER
HEATING
MODE
WATER
TEMPTEMP
OPER
HEATING
MODE
Sequence of thermostat operation
- How to set the heating temperature when thermostat is connected.
Set thermostat
to the heating mode
Adjust the heating temperature,
using the remote controller