10
PRODUCT INTRODUCTION
ENGLISH
Wireless remote control
Handling the remote control
- Aim at the signal receptor on the floor standing type air
conditioner when operating.
- The remote control signal can be received at a distance of up
to about 7 meters.
- Be sure that there are no obstructions between the remote
control and the signal receptor.
- Do not drop or throw the remote control.
- Do not place the remote control in a location exposed to
direct sunlight, next to heating unit, or other heat sources.
Control
panel
Description
Remote control operation lamp
|
Power ON/OFF button : Operation will start when
this button is pressed, and stop when the button is
pressed again.
Indoor fan speed button : To select the desired fan
speed.
Temperature setting button
A
Cooling button
Auto dry button
D
Dehumidification button : Can effectively remove
humidity when at the time of rainy season or high
humidity.
C
Auto operation button : In operation this function,
air conditioner control the setting temperature by
comparing room temperature and hot or cool level
customer set
Fan mode button
Air flow direction button(Up/down, Left/right) :
Adjust air flow direction vertically or horizontally.
Power cooling mode button : Powerful cooling is
performed
ON/OFF timer setting button : Set the time of
starting or stopping
Timer cancel button
NOTE
!
Some buttons cannot be used by model’s funtion.
To Next Page
Loading...
