LG APNQ100LFA0 - Child Lock Operation Function; Auto Re-Operation Function

14
OPERATING INSTRUCTIONS
ENGLISH
Child Lock Operation Function
1 Press the fan speed button and high
temperature setting buttons
simultaneously for seconds.
2 During child lock operation,
- Whenever you press any button on
display panel, it will immediately display
"CL", which means display panel is
locked.
- All the button on the indoor unit display
panel will not work.
- But the button on the remote control will
be operated.
3 Press the low and high temperature
setting buttons simultaneously for 3
seconds again. The unit will respond with
beep. child lock operation will removed.
Auto Re-Operation Function
When power is supplied again after unit
operation has been stopped because of
interruption of power supply due to outage or
other causes, auto re-operation will be
performed by remembering previous setting.
- When power is supplied, outdoor unit
operation will be started within 3 minutes.
1 Auto re-operation function can be
established/released by manipulating
indoor unit button.
* When initial state, Auto re-operation
function will be set up as standard.
Press the on/off, fan speed, high temp and
low temp buttons (4 buttons) simultaneously
for 3 seconds.
The unit will respond with beep and re-
operation function will be removed.
After funtion release, Press the on/off, fan
speed, high temp and low temp buttons (4
buttons) simultaneously for 3 seconds.
The unit will respond with beep and re-
operation function will be setted.
For Releasing Re-Operation Function
For Setting Re-Operation Function
< Type A >
< Type B >
< Type A >
< Type B >