To Next PageTo Next PageWhat to do if the remote control for my LG AR702TS Stereo Receiver does not operate?
If the remote control isn't working, first replace the batteries. If that doesn't solve the issue, check for any obstructions blocking the remote sensor.
Why is there no sound from my LG Receiver?
If there is no sound from your LG Receiver, it could be due to several reasons: the speaker wires may be disconnected (check the speaker connections); the MASTER VOLUME may be too low (adjust the MASTER VOLUME); the MUTE button may be on (press the MUTE button to cancel the muting effect); the selected decoding mode may not match the input signal format (select the available decoding mode); the input source may be incorrectly selected (select the desired input source correctly); there may be incorrect connections between the components (make connections correctly); or the USB cable may be separated during playing a file on the PC-LINK mode (execute a media player again).
What to do if my LG Receiver has no power?
If your LG Receiver has no power, the AC input cord might be disconnected (connect cord securely). Also, there could be a poor connection at the AC wall outlet, or the outlet might be dead or off (check the outlet using a lamp or another appliance).
How to fix poor FM reception on my LG Receiver?
To fix poor FM reception on your LG Receiver, make sure an antenna is connected (connect an antenna). Also, the antenna may not be positioned for the best reception (change the position of the antenna).
Why are stations not received on my LG Receiver?
If stations cannot be received on your LG Receiver, it may be because no antenna is connected (connect an antenna). It could also be that the desired station frequency is not tuned in (tune in the desired station frequency), or the antenna is in the wrong position (move antenna and retry tuning).
Why is there no sound from the surround speakers on my LG Receiver?
If there is no sound from the surround speakers on your LG Receiver, it could be because surround mode is switched off (normal stereo mode) - select a surround mode. It may also be that the MASTER VOLUME and surround level are too low - adjust MASTER VOLUME and surround level. Another reason could be that a monaural source is used - select a stereo or surround source. Finally, the surround speaker setting might be set to “NONE” - select the desired surround speaker setting.
Why is there no sound from the surround center speakers on my LG AR702TS Stereo Receiver?
If there is no sound from the surround center speakers, the input signal format or the current surround mode might not support the 6.1 surround. Under the proper situations, perform the 6.1 surround playback. Also, ensure that the MASTER VOLUME and surround center level are not set too low.
Why are stations on my LG AR702TS Stereo Receiver not being received?
If you're unable to receive stations, start by connecting an antenna. Then, tune in to the desired station frequency. If you still experience issues, try moving the antenna to a different position and retry tuning.
How to fix poor FM reception on my LG Stereo Receiver?
To improve FM reception, ensure an antenna is connected to your device. If an antenna is already connected, try repositioning it for better reception.
Why is there no sound coming from my LG AR702TS Stereo Receiver?
There could be several reasons for the lack of sound. First, check that the speaker wires are properly connected. Ensure that the MASTER VOLUME isn't set too low and that the MUTE button is not activated. Also, verify that the selected decoding mode matches the input signal format and that you've chosen the correct input source. Double-check the connections between all components. If you are playing a file in PC-LINK mode, try executing the media player again.
Initial setup and pre-connection procedures for safe and proper operation.
Explanation of manual symbols and a list of necessary connection cables.
Detailed description of front panel buttons, knobs, display, and indicators.
Identification and function of all rear panel connectors for audio/video sources.
Explanation of subwoofer's LED, volume, and frequency controls.
Meaning of various indicators and messages shown on the receiver's display.
Guidelines for remote operation range, aiming, and battery setup.
How to select and use different component control modes on the remote.
In-depth explanation of individual remote control button functions and their uses.
Instructions for controlling DVD playback functions using the remote.
Instructions for controlling VCR functions using the remote.
Instructions for controlling TV functions and LG TVs with the remote.
Guide for connecting digital audio output from sources like DVD players and tuners.
Guide for connecting digital video output from sources like DVD players and tuners.
Instructions for connecting analog audio sources like VCRs, tuners, and CD players.
How to connect video game consoles or camcorders to the receiver.
Guide for connecting various external media devices like PCs, USB drives, and iPods.
Procedure for connecting video sources and TVs for playback.
Steps for setting up video recording from various sources to a VCR.
Instructions for establishing HDMI connections for digital audio and video.
Guide for connecting the supplied AM loop and FM wire antennas.
Guidance on ideal speaker placement for 6.1 channel systems.
Detailed instructions for wiring speakers and subwoofer to the unit.
Initial operation, headphone use, and introduction to Audyssey setup.
Step-by-step guide for automatic speaker calibration using the Audyssey 2EQ system.
How to choose and switch between connected input sources.
Assigning digital audio inputs to specific sources for optimal signal reception.
Tables detailing audio and video signal output routing for various modes.
Instructions for playing MP3/WMA files from USB devices, including controls.
Connecting, operating, and controlling an iPod through the receiver.
Procedures for automatic and manual radio tuning.
How to store and recall favorite radio frequencies.
Explanation of Radio Data System tuning and display features.
How to search for radio stations by Programme Type (PTY).
Adjusting display brightness, muting sound, and setting the sleep timer.
How to view information about the current input source and signal format.
How to access and navigate the main setup menu.
Adjusting various surround sound listening modes and parameters.
Configuring speaker types, sizes, and crossover frequencies.
Configuring speaker distances and individual speaker levels.
Configuring HDMI output sound and digital input signal assignment.
Introduction to various surround sound processing modes like PLIIx and Neo:6.
Explanations for DSP, Enhancer, and Bypass listening modes.
Table showing listening mode compatibility with different audio signal formats.
Adjusting individual speaker levels and audio delay for synchronization.
Adjusting bass, middle, and treble sound levels.
Using the Night function for dynamic range control and saving/loading settings.
Definitions of Dolby Digital, Pro Logic, and related audio technologies.
Definitions of DTS, DTS-ES, and Neo:6 surround sound formats.
Solutions for common issues like no power, no sound, and poor reception.
Detailed technical data for power, dimensions, and tuner performance.
Technical details for AR702TT/AR702TS front, center, surround, and subwoofer models.
Technical details for AR702BR front, center, surround, and subwoofer models.
General| Audio Output Mode | Stereo |
|---|---|
| Tuner Bands | AM/FM |
| Output Impedance / Channel | 8 Ohm |
| Frequency Response | 20 Hz - 20 kHz |
| Speaker Impedance | 8 Ω |
