2008 Product Data 13
3. Features & Benefits
LG Wall Mounted Split models feature a Dehumidification
mode to remove uncomfortable humidity from the room
without over cooling.
Auto Clean
The main cause of air conditioner's odor is molds that
breed in the heatexchanger. If you turn off the air
conditioner as it is, molds and bacteria will breed in the
wet heat exchanger.
The automatic cleaning function will dry the wet heat
exchanger to prevent molds and bacteria from breeding.
It will eliminate air conditioner's odor and save you from
frequent cleaning efforts.
Conventional
Since the surrounding temperature is
measured after the air from the unit is
widely distributed, an accurate
assessment of the air is not possible.
Healthy
Dehumidification
By increasing the Vane Angle, a
better assessment of the actual
temperature is possible to prevent
over cooling.
Indoor Temperature Distribution Chart
When you press "Auto Clean”, Auto clean starts after
cooling operation.
In 30 minutes, Auto clean" dries the inner
part of Air conditioner.
1STEP :
Dries the evaporator with super-weak, low-
noise air blowing, and removes remaining moisture.
2STEP :
Fundamentally removes the sources of molds
once again through the neo plasma system.
Healthy Dehumidification
To Next Page
Loading...
Need help?
General
