LG BP550 - Playing a File on a Network Server

Operating 33
Operating
4
Notes on Connecting Android device
y
This unit can support only MTP (Media Transfer
Protocol) Android device.
y
Do not extract Android device during operation
(play, etc.).
y
Video, audio and photo les can be played. For
details of playing each le type, refer to the
relevant pages.
y
Regular back up is recommended to prevent
data loss.
y
If you use an USB extension cable, USB HUB or
USB Multi-reader, Android device may not be
recognized.
y
Some Android device may not work with this
unit.
y
When you use MTP, playing some music, photo,
movie, or subtitle les may not work depending
on Android device.
Playing a file on a network
server
yui
This player can play video, audio and photo les
located in a DLNA server through your home
network.
1. Check the network connection and settings
(page 16).
2. Press HOME (
b
).
3. Select [Movie], [Photo] or [Music] using
A/D
,
and press
S
.
4. Select DLNA media server in the category using
A/D
and press ENTER (
b
).
5. Select a file using
W/S/A/D
, and press
d
(PLAY) or ENTER (
b
) to play the file.
y
The le requirements are described on page
55.
y
The thumbnail of the unplayable les can
be displayed, but those cannot be played
on this player.
y
The subtitle le name and video le name
have to be the same and located at the
same folder.
y
The playback and operating quality may be
aected by your home network condition.
y
You may experience connection problems
depending on your server’s environment.
y
To set your PC as a DLNA server, install the
SmartShare PC Software on your PC. (page
34)
,
Note