9
Operating
2
y
Depends on the Installed Ap, some features
may be limited or not work.
y
Keep the distance less than 10 m between
the Blutooth device and this device.
Available distance may vary depending on
usage conditions.
y
If the device is out of the range, the pairing
is disconnected.
To reconnect, make the device be back in
the range. If the device is not reconnected
automatically, press
button to make
the device switch into "discovering" mode.
Within 10 m
,
Note
To connect to other device
To connect with other devices after disconnecting
the previous device.
Turn o the device and follow the instructions
below.
1. Press and hold button for more than 5
seconds when the device is turned on.
2. When you hear "Discovering" voice information,
turn on the Bluetooth function on your
Bluetooth device to select “LG BTS1”.
When the pairing is completed,
"Your device is connected" voice information is
heard, violet blinking twice.
Advanced Operating
Handsfree
This device supports a handsfree function via
Bluetooth. Before using this function, pair the
device with your phone.
Receiving a call: Press button to accept an
incoming call.
Rejecting a call: Press and hold button to
ignore an incoming call.
Switching the voice output: Press and hold
button for more than 3 seconds during a call.
Receiving a second call (During a call): Press and
hold button to accept an incoming call.
To return to the previous call, press and hold
button again (Only when call waiting is set on your
phone).
Finishing a call: Press button.
When you make a phone call: The voice output is
connected to the device automatically. Depending
on the phone, you need to press button for 3
seconds.
To mute or unmute microphone: Press button
for 3 seconds during a call.
To Next Page
Loading...
