Connecting 11
Connecting
2
Connecting the
speakers to the unit
Attaching the speakers to the
unit
To connect the cable to the unit, press each plastic
nger pad to open the connection terminals on the
unit. Insert the wire and release the nger pad.
Connect the black stripe of each wire to the
terminals marked - (minus) and the other end to
the terminals marked + (plus).
The speakers contain magnet parts, so color
irregularity may occur on the TV screen or PC
monitor screen. Please use the speakers far
away from either TV screen or PC monitor.
>
Caution
Antenna Connection
Connect the Antenna to the antenna port on the
back of the unit. Be sure to extend the FM/DAB wire
antenna fully.
CM2440-BB_AGBRLLK_ENG_7046.indd 11 2014-07-23 9:43:56
To Next Page
Loading...
Need help?
General
