LG CM2440DAB - Advanced Operations; Recording to USB; To Select Recording Bit Rate and Speed; Pausing Recording

Operating22
Operating
3
Advanced Operations
Recording to USB
1. Connect the USB device to the unit.
2. Select a function by pressing FUNCTION on the
remote control or F on the unit.
One track recording -You can record a track/ file
on USB while playing the file you want.
All tracks recording - You can record tracks/ files
on USB in stop state.
Program list recording - After making program
list, you can record it on USB.
(Refer to the page 19)
3. Start the recording by pressing USB REC on the
remote control.
4. To stop recording, press
Z
ENTER on the
remote control or
I
on the unit.
Pausing recording
During recording, press USB REC on the remote
control to pause recording. Press it again to restart
recording. (Only Radio, Portable)
To select recording bit rate
and speed
1. Press USB REC on the remote control for longer
than 3 seconds.
2. Use
C
/
V
on the remote control or
Y/U
on the unit to select the bit rate :
96 kbps -> 128 kbps -> 192 kbps -> 256 kbps
3. Press USB REC on the remote control again to
select the recording speed.
4. Press
C
/
V
on the remote control or
Y/U
on the unit on the remote control to
select a desired recording speed : (CD Function
only)
X1 SPEED
- You can listen to music while recording it.
(AUDIO CD Only)
X2 SPEED
- You can just record the music file.
5. Press USB REC on the remote control to finish
the setting.
The making of unauthorized copies of copy-
protected material, including computer
programs, les, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal oense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
CM2440-BB_AGBRLLK_ENG_7046.indd 22 2014-07-23  9:43:58