EasyManua.ls Logo

LG CMS9540F - Advanced Operations; Recording to USB

LG CMS9540F
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating 33
Operating
3
Advanced Operations
Recording to USB
You can record a various sound source to USB.
(CD, USB, AUX, AUX-MIC ,PORTABLE, FM)
1. Connect the USB device to the unit.
2. Select a function in which you want to record
by using FUNCTION knob on the unit or
FUNCTION on the remote control.
One track/file recording - You can record to USB
after playing a track/file you want.
All tracks/files recording - You can record to USB
after stop.
JUKE BOX list recording - After showing the
JUKE BOX list, you can record it to USB.
(Refer to the page 23)
3. Press
USB REC on the unit or USB REC on
the remote control.
- If you connect both USB1 and USB2, press
T
to record to USB1 or press
I
to record to
USB2.
4. To stop recording, press
I
on the unit or
Z
ENTER on the remote control.
Pausing recording
During recording, press
T
on the unit or
d
/
M
on the remote control to pause recording. Press it
again to restart recording.
(TUNER/AUX/AUX-MIC/PORTABLE only)
y
You can control recorded MIC sound
according to MIC volume when you record
in AUDIO CD X1 speed REC.
y
Depending on the sound recording in
MIC Input when you record in AUX-MIC
Function. (No matter the MIC volume
control.)
,
Note
To select recording bit rate and
speed
1. Press USB REC on the unit or USB REC on
the remote control for longer than 3 seconds.
2. Press
C
/
V
on the remote control or
Y
/
U
on the unit to select a bit rate.
3. Press
USB REC on the unit or USB REC on
the remote control again to select the recording
speed.
4. Press
C
/
V
on the remote control or
Y
/
U
on the unit to select a desired
recording speed. (AUDIO CD only)
X1 SPEED
- You can listen to music while recording it.
X2 SPEED
- You can just record the music file.
5. Press
USB REC on the unit or USB REC on
the remote control to finish the setting.
Dubbing USB to USB
You can do dubbing a various sound source in
USB1 to USB2 on USB function.
1. Connect a USB device including desired sound
files to USB1.
2. Connect another USB device to USB2.
3. Press
USB REC on the unit or USB REC on
the remote control.
4. To stop recording, press
I
on the unit or
Z
ENTER on the remote control.
The making of unauthorized copies of copy-
protected material, including computer
programs, les, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal oense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
CM9540-FB_DLKALLK_ENG.indd 33 2014-04-09 �� 3:05:12

Table of Contents

Other manuals for LG CMS9540F

Related product manuals