36
EN
5
Slide the brush back into the nozzle until it
clicks into place.
Cleaning the Bedding Power
Punch Nozzle
1
Separate the Bedding Power Punch Nozzle
from the product body and turn the nozzle
upside down.
2
Attach the crevice tool to the product body and
use the vacuum to remove foreign objects and
dust from the bottom of the Bedding Power
Punch Nozzle.
3
Use a damp towel or cloth to remove any
remaining foreign objects and dust from the
bottom of the Bedding Power Punch Nozzle.
After cleaning, wipe the nozzle dry.
• Do not rinse or submerge the Bedding
Power Punch Nozzle in water.
WARNING
• Never wash the Bedding Power Punch Nozzle
with water. Water could reach the motor and
cause electric shock or fire.
• Do not use the Bedding Power Punch Nozzle to
suck up oils or any liquids, including water.
Cleaning the Power Drive Mini
Nozzle
1
Remove the nozzle from the product a.
2
Push the button to separate the brush.
3
Attach the crevice tool to the unit and use the
vacuum to remove dust/foreign objects from
the brush and the bottom of the nozzle.
• Use a damp towel or tissue to remove any
remaining foreign matter and dust from the
brush and the bottom of the nozzle.
4
Insert the end of the brush b into the groove
c on the nozzle at the end.
To Next Page
Loading...
