37
EN
EN
5
Press the brush end cap to secure it. To lock
the cover, Push until a clicking sound is heard.
• If you have a hard time assembling it, check
that ‘Groove’ and ‘End of the brush’ are
aligned.
NOTE
• Always check the nozzle’s jockey wheel for
build up of debris such as hair or dust which
can cause it not to rotate freely. If this occurs it
can damage hard floors. It should be cleaned
regularly.
CAUTION
• Empty the bin after cleaning any pet hair. Not
doing so may cause a bad smell. Regularly
clean the jockey wheel on the power drive
nozzle so the wheel rotates freely.
Cleaning the Mop Nozzle
1
Press the nozzle release button a to remove
the mop nozzle from the extension pipe.
2
Use a damp towel or cloth to remove any
remaining foreign objects and dust from the
bottom of the mop nozzle.
• Foreign objects remaining on the nozzle
may result in a bad smell.
WARNING
• Always separate the mop nozzle from the
product body or remove the battery before
cleaning. If the mop attachment plate starts to
rotate during cleaning, it could cause an injury.
• Never wash the mop nozzle with water. Water
could reach the motor and cause electric shock
or fire.
• Do not use the mop nozzle to suck up oils or
any liquids, including water.
To Next Page
Loading...
