LG D2343P - Picture; Power Reduction; Co2 Reduction: on off; Wide;Original Wide

14
ENG
ENGLISH
CUSTOMIZING SETTINGS
PICTURE
1
To display the OSD MENU, press the MENU button
at the bottom of the monitor.
2
In the OSD menu, go to the "NEXT MENU" menu.
3
Press the ▼ button to go to the PICTURE settings.
4
Press the ◄ , ► , or ▼ button to change settings.
5
Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items,
use the up arrow ( ) button.
Each option is explained below.
MENU > NEXT
MENU > PICTURE
Description
SHARPNESS Adjusts the clearness of the screen.
BLACK LEVEL Sets up the offset level.
'HIGH' makes the screen brighter and 'LOW' makes it darker (only for HDMI).
y
Offset: As a reference for a video signal, this is the darkest color the monitor can display.
OVER SCAN Adjusts the displayed picture size in HDMI DTV timing (only for HDMI). If the monitor is con-
nected to an AV device, it is recommended that you enable the OVER SCAN function.
RESPONSE TIME You can set a response time for displayed pictures based on the speed of the screen. For a
normal environment, it is recommended that you use 'NORMAL'. For a fast-moving picture, it is
recommended that you use 'FAST'.
MENU
BRIGHTNESS
WIDE/ORIGINAL
WIDE
RESET
CONTRAST
NO
NEXT MENU
+%11%
,36->328%0
:)68-'%0
'03'/
:3091)
4,%7)
'30368)14
6)(
+6))2
&09)
1)29"2)<81)29"'3036
1)29"2)<81)29"(-740%=
1)29"2)<81)29":3091) 1)29"2)<81)29"38,)67
+%11%
'97831
0%2+9%+)
43;)6-2(-'%836
;,-8)&%0%2')
)2+0-7,
32
23
7,%642)77
&0%'/0):)0
,-+,
3**
2361%0
1)29"2)<81)29"4-'896)
3:)67'%2
6)74327)8-1)
SUPER ENERGY SAVING IS
ACTIVE
YOU SAVED 0.00 TREES
POWER REDUCTION:
ON
OFF
RESET
CO2 REDUCTION:
y
OVER SCAN and RESPONSE TIME are disabled in 3D mode.