LG D2770P-PN - Page 13

13
ENG
ENGLISH
USING THE MONITOR SET

WhenyouwanttousetwoPCintheMonitor,
pleaseconnectthesignalcable(D-SUB/
DVI-D/HDMI)respectivelyintheMonitorset.

IfyouturntheMonitorsetonwhileitiscold,
thescreenmayflicker.Thisisnormal.

Somered,green,orbluespotsmayappear
onthescreen.Thisisnormal.

"SelfImageSetting"Function.
Thisfunctionprovidestheuserwithoptimal
displaysettings.Whentheuserconnects
themonitorforthefirsttime,thisfunction
automaticallyadjuststhedisplaytooptimal
settingsforindividualinputsignals.(Only
supportedinAnalogMode)

‘AUTO’Function.
Whenyouencounterproblemssuchas
blurryscreen,blurredletters,screenflicker
ortiltedscreenwhileusingthedeviceor
afterchangingscreenresolution,pressthe
AUTOfunctionbuttontoimproveresolution.
(OnlysupportedinAnalogMode)
NOTE NOTE

Connectthesignal
inputcableandtighten
itbyturningthescrews
clockwise.

Donotpressthescreenwithyourfingerfor
alongtimeasthismayresultintemporary
distortiononthescreen.

Avoiddisplayingafixedimageonthe
screenforalongperiodoftimetoprevent
imageburn.Useascreensaverifpossible.
CAUTION
SelfImageSettingFunction
Pressthepowerbuttontoturnthepoweron.
Whenmonitorpoweristurnedon,the"SelfImage
Setting"Functionisexecutedautomatically.(Only
supportedinAnalogMode)