To Next PageTo Next PageWhy is there no sound from my LG Speaker System, or why is the sound very low?
If your LG Speaker System isn't producing any sound, or the sound is very quiet, ensure the equipment connected with the audio cable is set to receive DVD signal output. Also, check that the audio cables are securely connected and the connected equipment is powered on. If the issue persists, the audio connecting cord may be damaged and need replacement.
Why is there severe hum or noise heard from my LG Speaker System?
To resolve severe hum or noise from your LG Speaker System, wipe the plugs and jacks with a cloth slightly moistened with alcohol. Clean the disc. Ensure the speakers and components are securely connected. Also, move the TV away from the audio components.
What to do if the LG Speaker System remote control does not work properly?
If the LG Speaker System remote control isn't working, make sure it's pointed at the receiver's remote sensor and is within 23 ft (7 m). Remove any obstacles in the way. If it still fails, replace the batteries with new ones.
What to do if my LG Speaker System DVD receiver does not start playback?
If your LG Speaker System DVD receiver isn't starting playback, first ensure a playable disc is inserted correctly with the playback side down, and that it's placed properly within the guide. Clean the disc if it's dirty. Also, ensure no menu is on the TV screen by pressing the SET-UP button, and that the Rating level is not set or is appropriately adjusted.
How to fix no picture on LG Speaker System?
If your LG Speaker System shows no picture, first ensure the TV is set to receive the DVD signal output. Check that the video cable is securely connected and that the connected TV is powered on.
How to fix no power on LG Speaker System?
If your LG Speaker System isn't getting power, plug the power cord into the wall outlet securely.
Why is recording not possible on LG Speaker System?
If recording isn't possible on your LG Speaker System, ensure the components are correctly connected. Also, select the correct source using the FUNCTION button (CD/DVD, VIDEO 1, VIDEO 2, or Tuner).
General
