75
When you have both an active call and a call on
hold, you may switch between the two calls.
To switch between the two calls:
1 During the call, press the Options soft key,
highlight Swap Calls, and press .
• The active call is placed on hold and the other
call is activated.
2 Press to disconnect the active call.
Note: You can also easily swap calls by using the
Navigation key. Just press up or down to switch
between the calls.
Using the Speakerphone
While on a call, you can use your Speakerphone by
following these steps:
1 Press the Spk. On soft key.
2 Press the Spk. Off soft key to turn the
Speakerphone off.
To Next Page
Loading...
