How to fix color mismatch on LG DS325?
If the color of the projected image from your LG Projector does not match the source image, adjust the Color Temperature and Gamma settings on the Image menu of the OSD.
Provides essential safety guidelines for operating the projector and preventing hazards.
Lists the items included with the projector upon unpacking and advises checking for completeness.
Step-by-step guide on how to correctly insert batteries into the remote control.
Instructions on how to connect various external video and audio devices to the projector.
Guides on powering the projector on and off, including device connection order.
Procedure to set a password to prevent unauthorized use of the projector.
Instructions for leveling and angling the projector for optimal screen projection.
How to adjust image size, sharpness, and correct trapezoidal distortion using controls.
Visual guide to all available settings and their ranges within the OSD menus.
Details settings for adjusting image quality like brightness, contrast, color, and sharpness.
Detailed steps and critical safety warnings for replacing the projector's lamp module.
Instructions on how to reset the lamp hour counter to zero after lamp replacement.
General tips and initial checks for resolving common projector issues.
Troubleshooting specific issues related to projected image quality, such as blurriness or distortion.
Solutions for issues concerning the projector lamp's light output, operation, or failure.
General| Matrix size | 0.55 \ |
|---|---|
| Number of colors | 16.78 million colors |
| Projection technology | DLP |
| Contrast ratio (typical) | 2000:1 |
| Screen size compatibility | 33.55 - 260 \ |
| Projector native resolution | SVGA (800x600) |
| Lamp power | 200 W |
| Light source type | Lamp |
| Service life of light source | 2000 h |
| Service life of light source (economic mode) | 3000 h |
| Focal length range | 21.2 - 24.5 mm |
| HD-Ready | Yes |
| RMS rated power | 1 W |
| I/O ports | IR, D-sub |
| Dimensions (WxDxH) | 220 x 178 x 71 mm |
| Power requirements | AC 100 - 240V |
| Connectivity technology | Wired |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| S-Video inputs quantity | 1 |
| Power consumption (typical) | 260 W |
Weight and Dimensions| Weight | 1450 g |
|---|
To Next Page
