Use this option to prevent unwanted
use of the washer. Press and hold
Option left and right button for 3 seconds
to lock/unlock control.
When Child lock is set, CHILD LOCK
lights and all buttons are disabled
except the Power button. You can
lock the washer while it is operating.
The Beep on/off function can be set by pressing
and holding the Option and Rinse button
simultaneouly.
Select a water temperature based
on the type of load you are
washing.
By pressing the Rinse button, the
Rinse type can be selected.
This display shows:
a) the estimated time remaining in the
cycle when operating.
To change the spin speed, turn the
Spin knob to cycle through available
options.
Child Lock
EST. T ime remaining
Spin Selector knob
Tub Clean course can be set by
pressing and holding Rinse and
Te mp button simultaneously.
Tub Clean is a special cycle to
clean the inside of the washer.
Tub Clean
Beep on/off
Rinse, Temp. Button
In case of abormal operation, error
indications are displayed.
(
)
• See troubleshooting
ting
am.
e.
To Next Page
Loading...
Need help?
General
