LG F1443KD Series Service Manual

24
Key Key Knob
Pre Wash
Temp
Reference of checking the vibration
sensor error
1. Range of vibraiton sensor data have to
change between 1900 and 2100 in
stopping the motor.
2. When the washer is spining, if the vibration
sensor data doesn’t change and keeps the
static value, we need to suspect
disconnection or noise effect.
3. In case of over-range, we also need to
check the status of vibration sensor.
1) Data View Type : Press and Hold Pre Wash and Temp key simultaneously, and then turn around the
knob until it display ‘043’.
2) Vibration Sensor Data = Vib_Sensor X-axis_01 x 100 + Vib_Sensor X-axis_02
3) Vibration Sensor status : If it display ‘000’, normal, ‘001’ incorrect initial position of vibration sensor or
offset error, 002 disconnection of vibration sensor.
Display Data V
iew Mode
Y-axis_01
Y-axis_02
X-axis_01
X-axis_02
1)
043 Vib_Sensor XXX
XXX Vib_Sensor XXX
XXX XXX XXX
XXX XXX XXX
2)
Vib_Sensor XXX
3)
XXX
Vib_Sensor XXX XXX
7-5 HOW TO CHECK THE VIBRATION SENSOR

LG F1443KD Series Specifications

General

Brand	LG
Model	F1443KD Series
Category	Washer
Language	English